Fimavyn Supplement Facts: Amounts and %DV per Serving

Written by the GoFimavyn editorial desk
Last updated · Who reviewed this page · How we write and review
The Fimavyn panel lists 2 capsules per serving and 30 servings per bottle.
Each serving holds zinc 11 mg (100% DV), chromium 100 mcg (286% DV), alpha lipoic acid 150 mg, green tea extract 150 mg, berberine HCl 100 mg, resveratrol 40 mg and a 112 mg four-herb blend.
What does the Fimavyn label print, panel by panel?
The Fimavyn bottle carries three panels: directions and cautions, the front claim, and the Supplement Facts box. Together they list seven ingredient lines, a 2-capsule serving and 30 servings per bottle.
Tap a numbered dot on the image for a short note in plain English. All ten notes also open as a list under the picture.

Read all 10 label notes
- Directions: two capsules a day with water make one serving.
- Who should skip it: anyone under 18, pregnant or nursing. People on medicine should ask a physician first.
- Keep the bottle cool and dry, under 86°F (30°C).
- The label lists FIMAVYN of Aurora, Colorado as distributor. No factory is named.
- Front line: Metabolic Activation, Healthy Weight & Energy Support. The asterisk leads to the FDA statement.
- Zinc 11 mg (100% DV) and chromium 100 mcg (286% DV) are the two lines with a Daily Value.
- Alpha lipoic acid 150 mg; green tea extract 150 mg, roughly 75 mg of it EGCG.
- Berberine HCl 100 mg next to resveratrol 40 mg.
- A 112 mg blend of milk thistle, cayenne, Asian ginseng and banaba, with no split given.
- Fillers: microcrystalline cellulose, magnesium stearate, silica.
What are the exact Fimavyn amounts per serving?
Each 2-capsule serving of Fimavyn lists six single actives and one 112 mg blend. Here is the panel typed out, so it is easy to read on a phone.
The dagger mark means no Daily Value has been set for that ingredient.
Supplement Facts
Serving Size: 2 Capsules · Servings Per Container: 30
| Ingredient | Amount per serving | % Daily Value |
|---|---|---|
| Zinc as Zinc Gluconate | 11 mg | 100% |
| Chromium as Chromium Picolinate | 100 mcg | 286% |
| Alpha Lipoic Acid antioxidant fatty-acid compound | 150 mg | † |
| Green Tea Leaf Extract Camellia sinensis; 98% polyphenols, 80% catechins, 50% EGCG | 150 mg | † |
| Berberine HCl from Berberis aristata root, 97% berberine | 100 mg | † |
| Resveratrol from Polygonum cuspidatum root extract 200:1 | 40 mg | † |
| Proprietary Blend Milk Thistle seed extract (80% silymarin), Cayenne fruit (40,000 H.U.), Asian Ginseng aerial parts (8% ginsenosides), Banaba leaf extract (2% corosolic acid) | 112 mg total | † |
† No Daily Value set. Percent Daily Values assume a 2,000 calorie diet. Other ingredients: Microcrystalline Cellulose, Magnesium Stearate, Silica. The four herbs share 112 mg with no single amounts shown.
Why does Fimavyn show seven lines but ten actives?
The seventh line on the Fimavyn panel is a blend that holds four herbs. Six single lines plus four blend herbs make ten named actives.
The ring shows each label line around the bottle. Only six of them come with an amount you can check against research.

- 11 mgZinc
- 100 mcgChromium
- 150 mgAlpha Lipoic Acid
- 150 mgGreen Tea Leaf Extract
- 100 mgBerberine HCl
- 40 mgResveratrol
- 112 mg totalProprietary Blend
What do the Fimavyn percent Daily Value figures mean?
Only zinc and chromium show a percent Daily Value on the Fimavyn panel. Zinc reads 100% and chromium reads 286%, because each has an official daily target.
A figure over 100% does not by itself mean too much. Chromium has no set upper limit (NIH ODS, n.d.), and zinc stays well under its 40 mg adult limit (NIH ODS, 2026).
| Label line | Amount | % DV | How to read it |
|---|---|---|---|
| Zinc | 11 mg | 100% | The Daily Value for zinc is 11 mg, so one serving meets it exactly. |
| Chromium | 100 mcg | 286% | The Daily Value is 35 mcg. 100 divided by 35 gives about 2.86, or 286%. |
| Alpha lipoic acid, green tea, berberine, resveratrol | 40-150 mg each | † | No Daily Value exists for these compounds. |
| Proprietary blend | 112 mg | † | No Daily Value, and no single herb weights. |
What does the proprietary blend line on Fimavyn tell you?
The Fimavyn blend line names milk thistle, cayenne, Asian ginseng and banaba, with a combined weight of 112 mg. It does not say how much of each herb is inside.
That means none of the four can be lined up against a study dose. You know the herbs are present, and you know their total is 112 mg, but nothing more.
- Known: the four herb names and their plant parts
- Known: the standard for each herb, such as 80% silymarin
- Known: the 112 mg total per serving
- Not published: the weight of any single herb
Which forms and standards does the Fimavyn label name?
The Fimavyn label names a form or standard for every active. These details tell you which salt, plant part or extract strength the maker chose.
Where a percent is printed, you can work out the real amount of the key compound. For the blend herbs, the percent is known but the herb weight is not.
| Ingredient | Form or standard on the label | What it tells you |
|---|---|---|
| Zinc | Zinc gluconate | The mineral salt used to deliver zinc |
| Chromium | Chromium picolinate | The form tested in a Cochrane weight review |
| Green tea leaf extract | 98% polyphenols, 80% catechins, 50% EGCG | About 75 mg of EGCG per serving |
| Berberine HCl | Berberis aristata root, 97% berberine | About 97 mg of berberine per serving |
| Resveratrol | Polygonum cuspidatum root extract 200:1 | Concentration of the root extract; 40 mg of resveratrol |
| Milk thistle | Seed extract, 80% silymarin | Share of silymarin, but the herb weight is unknown |
| Cayenne | Fruit, 40,000 H.U. | Heat units, a measure of pungency |
| Asian ginseng | Aerial parts, 8% ginsenosides | Leaves and stems, not root |
| Banaba | Leaf extract, 2% corosolic acid | Share of corosolic acid in the extract |
What do the Fimavyn cautions, storage and distributor lines say?
The small print says Fimavyn is for adults, should be kept cool and dry, and is distributed from Aurora, Colorado. It names no manufacturer.
The caution reads: “Do not exceed recommended dose. Not for use for those under the age of 18 or pregnant or nursing mothers. Consult with a physician prior to use especially if you are taking a medication or have a medical condition.”
Keep the bottle in a cool, dry place below 86°F (30°C), out of reach of children.
Do not use the bottle if the safety seal is damaged or missing.
FIMAVYN, Aurora, CO 80011. The label also prints [email protected] and the code MF_266_01_081926.
Is Fimavyn third-party tested, and what do the seals mean?
Fimavyn has no published independent lab report. The lot number FIM-26/GO-8463 and CoA number FIM-8463-26-GO are draft labels, not lab proof.
The three seals below come from the seller. The bottle label itself prints no GMP line and no FDA-facility line.
GMP seal, seller-supplied
Describes a factory, not the product
Guarantee terms set at checkout
FDA does not issue registration certificates, so “FDA registered” is not an approval (FDA, n.d.). See Fimavyn testing and quality and how to check a Fimavyn batch.
What does the FDA statement on a Fimavyn bottle mean?
The asterisk on the Fimavyn front claim points to a standard FDA notice. It says the claims have not been evaluated by FDA and that the product is not meant to diagnose, treat, cure or prevent any disease.
FDA does not approve supplements for safety or effectiveness before they are sold (FDA, n.d.). Labels may describe support for body structure or function, but they may not claim to treat disease (FDA, n.d.).
How do you check your own Fimavyn bottle in five steps?
Hold your bottle next to this page and work through the label in order. Each step takes a few seconds.
- 1
Check the seal
An intact safety seal comes first. Do not use the bottle if it is broken or missing.
- 2
Read the front
Look for Metabolic Activation, Healthy Weight & Energy Support and 60 vegan capsules.
- 3
Match the panel
Compare each amount with the typed panel above, line by line.
- 4
Find the small print
Confirm the Aurora, CO distributor line and the storage note.
- 5
Count the serving
Two capsules per serving, 30 servings, and no more than the label says.
For what each ingredient does, read the Fimavyn ingredients guide.
Reading the Fimavyn label: common questions
Questions people type into Google and Bing, answered from the label and the sources on this page.
What is printed on the Fimavyn Supplement Facts panel?
Seven lines per 2 capsules: zinc, chromium, alpha lipoic acid, green tea extract, berberine HCl, resveratrol and a 112 mg herbal blend, plus three other ingredients.
How many capsules make one Fimavyn serving?
Two. The panel reads Serving Size: 2 Capsules, and that is the whole daily amount.
How many capsules come in a Fimavyn bottle?
Sixty vegan capsules, which the panel counts as 30 servings.
What is a proprietary blend on a supplement label?
It is a named mix of ingredients shown with one total weight. The maker lists what is in it but not how much of each part.
Why doesn't Fimavyn print each herb amount in the blend?
The label gives no reason. It shows the 112 mg total and leaves the single herb weights unpublished.
Does 100 mg of berberine HCl do much?
It is small next to research. Most diabetes trials used 900 to 1,500 mg of berberine a day (Wang et al., 2024).
Which forms of zinc and chromium does Fimavyn use?
Zinc gluconate and chromium picolinate, both named on the panel.
Are Fimavyn capsules vegan, and are they gluten-free?
The label front says 60 vegan capsules. It does not make a gluten-free claim, so that is not confirmed.
Has an outside lab tested Fimavyn?
No independent lab report has been published. The lot and CoA numbers in circulation are draft labels, not lab results.
What does the asterisk statement on the Fimavyn label mean?
It says FDA has not evaluated the claims. Supplements can make structure/function claims without FDA review, but they must carry that notice (FDA, 2024).